KEFSVOK-2

Purpose of the SCANROC KEFSVOK-2 installation system

Installation of the ventilated SCANROC KEFSVOK-2 ventilated facade is performed on all types of walls, except for walls made of low density cellular concrete(D<600).

Fastening of the SCANROC
KEFSVOK-2 system is carried out on the whole surface of the wall.

The SCANROC KEFSVOK-2 system is a patented system

The SCANROC KEFSVOK-2 system, like all other SCANROC
systems, is highly reliable and durable.

All SCANROC ventilated facade systems have been certified in Ukraine, Western Europe and other countries.

SCANROC ventilated facades are exported to Belarus, Kazakhstan, Scandinavia, Baltic countries, Czech Republic, Slovakia, Germany, Denmark, Holland and even Australia.

General view of the SCANROC KEFSVOK-2 system

All SCANROC KEFSVOK systems consist of three groups:

  • structural metal part
  • heater
  • front [SCANROC facade tile]

Explanation of the scheme:

  1. Wall (for example, ceramic or silicate brick, ceramic stones, reinforced concrete, cellular high-density concrete blocks D≥600)
  2. Mounting points
  3. Structural metal part
  4. Heater
  5. Facade tile SCANROC

The structure of the structural metal part of the SCANROC KEFSVOK-2 system

All metal parts of the system are made of high quality European hot-dip galvanized steel.

All screws and anchor bolts are hot-dip galvanized.

Explanation of the scheme:

  1. Wall
  2. Anchor dowel
  3. Screw anchor
  4. Termoizolyatsіyna laying SCANROC T-1
  5. Console SCANROC K-1.1 ABO K-1.2, K-1.3, K-1.4
  6. Hot dip galvanized screws 6,3х19
  7. Hot dip galvanized screws 4,8х13
  8. Rigel SCANROC Р-1.1
  9. Rack SCANROC С-1

The SCANROC C-1 is directly attached to the SCANROC tile.

The diagram shows the placement of SCANROC C-1 racks in 600 mm increments for LONG Format [600 × 100 mm] and LARGE Format [600×200 mm] tiles. To hang the tiles of the cottage format COTTAGE Format [300×100 mm] the number of racks SCANROC C-1 is doubled in increments of 300 mm.

Accessories SCANROC KEFSVOK-2 systems

Anchor with hot-dip galvanized screw 10x80 for concrete (HRV type)
Anchor with hot-dip galvanized screw 10x80 for concrete (HRV type)
Anchor with hot-dip galvanized 10x100 screw for solid brick (HRV type) for hollow brick and high density concrete D≥600 (HRD type)
Anchor with hot-dip galvanized 10x100 screw for solid brick (HRV type) for hollow brick and high density concrete D≥600 (HRD type)
SCANROC K-1.1 Console | L = 102 mm under insulation 50… 100 mm thick
SCANROC K-1.1 Console | L = 102 mm under insulation 50… 100 mm thick
SCANROC K-1.2 Console | L = 152 mm under insulation up to 150 mm thick
SCANROC K-1.2 Console | L = 152 mm under insulation up to 150 mm thick
SCANROC K-1.3 Console | L = 190 mm under insulation up to 200 mm thick
SCANROC K-1.3 Console | L = 190 mm under insulation up to 200 mm thick
SCANROC K-1.4 Console | L = 230 mm under insulation up to 230 mm thick
SCANROC K-1.4 Console | L = 230 mm under insulation up to 230 mm thick
Rigel SCANROC P-1.1 | L = 3 600 mm
Rigel SCANROC P-1.1 | L = 3 600 mm
Rack SCANROC C-1 | L = 3000 mm tile step = 100 mm
Rack SCANROC C-1 | L = 3000 mm tile step = 100 mm
Rack SCANROC C-1.75 | L = 3000 mm tile step = 75 mm
Rack SCANROC C-1.75 | L = 3000 mm tile step = 75 mm
The self-tapping screw is hot-dip galvanized 6,3х19
The self-tapping screw is hot-dip galvanized 6,3х19
The self-tapping screw is hot-dip galvanized 6,3х19
The self-tapping screw is hot-dip galvanized 6,3х19
Termoizolyatsіyna laying SCANROK T-1
Termoizolyatsіyna laying SCANROK T-1

Installation stages of the SCANROC KEFSVOK-2 system

Step 1.
Marking and drilling of holes
Perform markup according to the project. Drill holes to install anchor bolts.
Step 2.
Installation of dowels
Insert dowels into the prepared holes
Step 3.
Installation of SCANROC K-1.X consoles
Attach the consoles to the wall with the help of anchor screws by pre-installing the T-1 thermal insulation one piece under each console.
Step 4.
Installation of crossbars SCANROC P-1.1
Crossbars SCANROC P-1.1 form the basis for the placement of vertical racks SCANROC C-1 or C-1.75, which are directly hung tiles SCANROC

Fastening of crossbars SCANROC P-1.1 to consoles SCANROC K-1.X is made with the help of hot-dip galvanized screws 6,3×19 (1-2 pieces for each attachment point).

Crossbars are joined together along the lintel wall
Step 4.1.
General view of the point of attachment of the SCANROC system to the wall.
The console is attached to the middle hole.
After mounting the consoles, be sure to check the tightening of the anchors
Step 5.
Installation of thermal insulation
Before installing the insulation mats, it is necessary to cut through the holes through the knife for the projecting elements of the consoles. After the mats are hung, the holes in the wall (everywhere the mat) are drilled.

Technology of fastening of thermal insulation is carried out in accordance with building codes.
Step 6.
Fastening of thermal insulation
Install the umbrella anchors into the holes and secure them with the studs included with the umbrella anchor.

Technology of fastening of thermal insulation is carried out in accordance with building codes.
Step 7.
Installation of Rack SCANROC C-1 (C-1.75)
SCANROC C-1 (C-1.75) racks act as SCANROC tile holders. The SCANROC C-1 rack is fastened directly to the SCANROC P-1.1 crossbar with the help of 4.8×13 hot-dip galvanized screws (1 pc for each mounting point).

Depending on the length of the tile, the SCANROC C-1 racks are placed in increments of 600 mm (for LONG 600 × 100 and LARGE 600 × 200) or 300 mm (for COTTAGE 300×100). SCANROC C-1.75 racks are placed depending on other formats of SCANROC clinker tiles.
Step 8.
Mounting of facade tiles SCANROC
After mounting the entire system on the protruding antennae of the SCANROC C-1 racks, the SCANROC tiles are hung.

The attachment is done by pressing on the tile and planting its groove on the antennae of the stand C-1.

Each tile should have 3 points of resistance – left, right edge and middle. At a minimum, every fifth row must be secured with additional anti-vandal antennae having SCANROC C-1 counters unless otherwise provided by the project.